Curriculum Vitae

 

Mostafa Rezaei, PhD
Associate Professor of Polymer Engineering


PERSONAL INFORMATION

Name: Mostafa
Family Name: Rezaei
Birth Date: May, 28, 1975
Status: Iranian Citizen
Address: Sahand University of Technology
P.O.Box 51335-1996, Tabriz, IRAN
Tel: +98 41 33459086
Fax: +98 41 33444313
Email:
rezaei@sut.ac.ir
Languages: Persian, Turkish (Azeri) and English

Research Interests

- Engineering Properties of Polymers,  Polymer Physics
- Polymeric Biomaterials,  Tribological Properties of Polymers and Composites
- Rheology , Sintering of polymers
- Polymeric Foams, Coating

Main Skills

- Rheological Studies (Biconical and Parallel Plate Rheometers)
- Thermal Analysis (DSC and TG/DTA)
- Contact Angle Measurement by Goniometry (Surface Tension Measurments)
- Sintering Stusdies by Stereo Microscope
- Spectroscopy (XPS and FTIR)
- Tribological Studies ( Pin- on- Disc Wear testing Machine and Hip Joint Simulator)

Publications

JOURNAL PAPERS

1. M. Rezaei,N.G. Ebrahimi and M. Kontopoulou, Thermal properties, rheology and sintering of UHMWPE and its composite with PET fibers, Polymer Engineering and Science ,2005, vol. 45, p.678-686.

2. M. Rezaei,N.G. Ebrahimi and M. Kontopoulou, Surface modification of UHMWPE, I: Characterization and Sintering Studies, Journal of Applied Polymer Science, 2006, Vol 99, Issue 5, p. 2344-2351.

3. M. Rezaei, A. Shirzad, N.G. Ebrahimi and M. Kontopoulou, Surface modification of UHMWPE, II: The effect on physico-mechanical and tribological properties of UHMWPE/PET composite, Journal of Applied Polymer Science, 2006, Vol. 99, Issue 5, p. 2352-2358.

4. M. Rezaei, A. Shirzad and N.G. Ebrahimi, Study on Mechnical Properties of UHMWPE/PET Composites Using Robust Design, Iranian Polymer Journal, 2006, 15 (1), p. 3-12.

5. H. G. Kalteh, M. Rezaei, N. Sheikh and F. Abbasi, Radiation Induced Graft Copolymerization of MMA Monomer onto UHMWPE: Adhesion Improvement, Journal of Applied Polymer Science, 2008, Vol. 108, Issue 2, p. 1086-1092.

6. Y. Akbarzadeh, M. Rezaei, A.A. Babaluo, A. Charchi, H. R. Azimi and Y. Bahluli, Microstructure, Permeability and Rheological Behavior of Lost Foam Refractory Coatings, Surface and Coating Technology, 2008, Vol. 202, p. 4636-4643.

7. H. R. Azimi, M. Rezaei, F. Abbasi, A. Charchi, Y. Bahluli, Non-Isothermal Degradation Kinetics of MMA-St Copolymer and EPS Lost Foams, Thermochimica Acta, 2008, Vol. 474, p. 72-77.

8. H. R. Azimi, M. Rezaei, F. Abbasi, Thermo-Oxidative Degradation of MMA-St Copolymer and EPS Lost Foams: Kinetics Study, Thermochimica Acta, 2009, Vol. 488, p. 43-48.

9. E. Esmaeilnezhad, M. Rezaei, M. K. Razavi, The Effect of Alternative Blowing Agents on Microstructure and Mechanical Characteristics of Rigid Polyurethane Foam, Iranian Polymer Journal, 2009, vol. 18 (7), p. 1-11.

10. M. Khodabandelou, M.K. Razavi Aghjeh, M. Rezaei, Fracture behavior and environmental stress cracking resistance (ESCR) of HIPS/PE blends and the effect of compatibilization on their properties, Engineering Fracture Mechanics, 2009, vol. 76, p. 2856-2867.

11. S. Ravanbakhsh, M. Rezaei, N. Sheikh, A. Heidari, Irradiation Grafting of MMA Monomer onto UHMWPE: An Experimental Design Approach for Improving Adhesion to Bone Cement, Journal of Applied Polymer Science, 2010, vol. 116, p. 886-894.

12. حميدرضا عظيمی، مصطفی رضائی، مجيد جمالی, علی چرچی, سينتيک تخريب حرارتی پلی¬استايرن و پلی متيل متاکريلات، مجله مهندسی شيمی ايران، سال هشتم، شماره چهل و يکم، 1388، صفحه 46.


13. ابراهيم اسمعيل¬نژاد، مصطفي رضائي، سعيد شكوري، ميركريم رضوي، مطالعه اثر عوامل پف¬زاي مختلف روی ريز ساختار و ضريب انتقال حرارت فوم سخت پلي¬يورتان، مجله مهندسی شيمی ايران، سال هشتم، شماره چهلم، 1388، صفحه 38.


14. A. Charchi, M. Rezaei, S. Hossainpour, J. Shayegh, S. Falak, Numerical simulation of heat transfer and fluid flow of molten metal in MMA-St copolymer lost foam casting process, Journal of Materials Processing Technology, 210 (2010) 2071–2080.

15. J. Shayegh, S. Hossainpour , M. Rezaei , A. Charchi, Developing a new 2D model for heat transfer and foam degradation in EPS lost foam casting (LFC) process, International Communications in Heat and Mass Transfer, 37 (2010) 1396–1402.

16. G. Mousavi, D. Mohajeri, M. Rezaei, F. Moutablaleh, A. Rezaei and Y. Doustar, Effect of sodium flouride on cancellous bone defect healing in rats, American Journal of Pharmacology and Toxicology, 5 (4), 2010, 177-182.

17. M. Valizadeh, , M. Rezaei, A. Eyvazzadeh, Effect of Nanoclay on the Mechanical and Thermal Properties of Rigid Polyurethane/Organoclay Nanocomposite Foams Blown with Cyclo and Normal Pentane Mixture, Key Engineering Materials Vols. 471-472 (2011) pp 584-589.

18. F. Zandi, M. Rezaei, A. Kasiri, Effect of Nanoclay on the Physical-Mechanical and Thermal Properties and Microstructure of Extruded Noncross-linked LDPE Nanocomposite Foams, Key Engineering Materials Vols. 471-472 (2011) pp 751-756.

19. HamidReza Azimi, Mostafa Rezaei, Farhang Abbasi, The effect of expansion conditions on the batch foaming dynamics of St-MMA copolymer, Journal of Cellular Plastics, 2012, 48(2), 125-140.

20. E. Mehravar, F. Abbasi, K. Jalili, M. Rezaei, S. Heydarpoor, Synthesis and Expansion Characteristics of Expandable Styrene/Methyl Methacrylate Copolymer Beads: The Effects of Monomer Composition and Cell Structure Modifying Aid, Journal of Cellular Plastics, 2012, 48(2), 161-190 .

21. M. Rakhshani, M. M. Kamrannejad, A. A. Babaluo, M. Rezaei and M. K. Razavi Aghjeh, Thermal Degradation Behavior and Kinetics Studies of Polyacrylamide Gel in TiO2 Nanoparticles Synthesis, Iran Polym J, 2012, 21, 821:828.

22. H. R. Azimi, M. Rezaei, Solubility and diffusivity of carbon dioxide in St-MMA copolymers, Journal of Chemical Thermodynamics, 2013, 58, 279-287.

23. S. Salkhi Khasraghi, M. Rezaei, Preparation and Characterization of UHMWPE/HDPE/MWCNT Melt Blended Nanocomposites, J. Thermoplastic Composite Materials, 2015, 28 (3), 305-326.

24. P. Sokhandani, A. A. Babaluo, M. Rezaei, M. Shahrezaei, A. Hasanzadeh, S. G. Mehmandoust, R. Mehdizadeh, Nanocomposites of PVC/TiO2 nanorods: Surface tension and mechanical properties before and after UV exposure, Journal of Applied Polymer Science, Volume 129, Issue 6, 3265–3272, 2013.

25. H. R. Azimi, M. Rezaei, F. Majidi, The nonisothermal degradation kinetics of St-MMA copolymers, Polymer Degradation and Stability, 99, 240-248, 2014.

26. A. Kasiri, M. Rezaei, F. Zandi, The Effect of PE-g-MA compatibilizer on the Physical, Mechanical and Thermal Properties of Extruded Non-crosslinked LDPE Nanocomposite Foams, Journal of Thermoplastic Composite Materials, 28 (11), 1537-1549, 2015.

27. P. Sokhandani, M. A. Abdi, S. G. Mehmandoust, A. A. Babaluo, R. Mehdizadeh ,Mostafa Rezaei, M. Rakhshani, Effects of carbon coated Titanium Dioxide Nanoparticles as a Photo Stabilizer on the Photo degradation of Rigid Poly(vinyl chloride), Journal of Applied Polymer Science, 131, issue 9, 2014.

28. M. T. Taghizadeh, N. Yeganeh, M. Rezaei, Kinetic analysis of the complex process of poly (vinyl alcohol) pyrolysis using a new coupled peak deconvolution method, Journal of Thermal Analysis and Calorimetry, 118(3), 1733-1746, 2014.

29. Z. Mohammadian, M. Rezaei, T. Azdast, Microstructure, Physical and Mechanical Properties of LDPE/UHMWPE Blend Foams: An Experimental Design Methodology, Journal of Thermoplastic Composite Materials, 2016, Vol. 29(9) 1229–1260.

30. H. R. Azimi, M. Rezaei, M. Salehi, The effect of copolymer composition on the batch foaming dynamics of St/MMA copolymers, Journal of Thermoplastic Composite Materials, 2017, Vol. 30(1) 47–66.

31. M. T. Taghizadeh, N. Yeganeh, M. Rezaei, The Investigation of thermal decomposition pathway and products of Poly(vinyl alcohol) by TG-FTIR, Journal of Applied Polymer Science, 132 (25), 42117 (1-12), 2015.

32. A. Eyvazzadeh, M. Rezaei, F. Abbasi, Preparation, characterization and thermo-mechanical properties of poly (ε-caprolactone)-piperazine based polyurethane-urea shape memory polymers, Journal of Material Science, 2016, Volume 51, Issue 9, pp 4379-4389.

33. M. Salehi, M. Rezaei, M. Salami Hosseini, Experimental and theoretical investigation on polystyrene/n-pentane foaming process, International Journal of Material Forming, 2017, Volume 10, No. 3, pp. 421-434

34. مصطفی صالحی، مهدی سلامی حسینی، مصطفی رضائی، شبیه سازی رفتار رشد حباب در سیستم فوم شدن ناپیوسته پلی¬استایرن/دی اکسیدکربن با روش المان محدود، مجله مهندسی مکانیک مدرس، مرداد 1395، دوره 5، شماره 16، ص 328-321 .

35. H. R. Azimi, M. Rezaei, The determination of n-pentane solubility and diffusivity in St-MMA copolymers via designed apparatus, Journal of Cellular Plastics, 2016, 35. H. R. Azimi, M. Rezaei, The determination of n-pentane solubility and diffusivity in St-MMA copolymers via designed apparatus, Journal of Cellular Plastics, May 2017,Volume 53, Issue 3, pp. 319–331.

36. Ehsan Mehravar, Farhang Abbasi, Kiyumars Jalili, Hadi Rostami, Mostafa Rezaei, Expansion characteristics of expandable styrene/methyl methacrylate copolymer particles: The effects of copolymer molecular weight and particle size, Journal of Cellular Plastics, 2016, In press.

37. R Hosseinnezhad, S Talebi, M Rezaei, The unique effect of chain entanglements and particle morphology on the sintering of ultrahigh molecular weight polyethylene, Journal of Elastomers and Plastics, 2016, In press.

38. 
A. Eyvazzadeh, M. Rezaei, F. Abbasi, G. M. Sadeghi, The effect of chain extender type on the physical, mechanical and shape memory properties of poly (ε-caprolactone)-based polyurethane-ureas, Polymer- Plastic Technology and Engineering, 2017, In press.

39. A. Heidari, S. Talebi , M. Rezaei, H. Keshavarz-Mirzamohamadi & E. Jafariyeh-Yazdi, In-situ synthesis of ultra high molecular weight polyethylene/graphene oxide nanocomposite using the immobilized single site catalyst, Polymer-Plastics Technology and Engineering, 2017, In pres.


CONFERENCE PAPERS 

1. P. Rezaei, M. Rezaei, S. Talebi, The Effect of Molding Time on Microstructure and Mechanical Properties of Rigid Cross-Linked PVC Foams, The 9th International Chemical Engineering Congress & Exhibition (IChEC 2015), Shiraz, Iran, 26-28 December, 2015.

2. M. Salehi, M. Rezaei, M. Salami Hosseini, Modeling of the Bubble Growth Dynamics in PS/CO2 Foaming System, THERMAM 2014, Thermophysical and Mechanical Properties of advanced Materials, June 2014, Izmir, Turkey.

3. Hamid Reza Azimi, Mostafa Rezaei, Mostafa salehi, Solubility and diffusivity of normal pentane and supercritical CO2 in St-MMA copolymer with different compositions, THERMAM 2014, Thermophysical and Mechanical Properties of advanced Materials, June 2014, Izmir, Turkey.

4. Hamid Reza Azimi, Mostafa Rezaei, Faezeh Majidi, Study on the thermal degradation of St-MMA copolymers with different compositions using isoconversional method, THERMAM 2014, Thermophysical and Mechanical Properties of advanced Materials, June 2014, Izmir, Turkey.

5. Reza Izadpanah, Azadeh Karimpour, Mostafa Rezaei, Mechanical Properties, Microstructure and Density of Rigid Crosslinked PVC/Organoclay Nanocomposite Foams, THERMAM 2014, Thermophysical and Mechanical Properties of advanced Materials, June 2014, Izmir, Turkey.

6. Mostafa Salehi, Mostafa Rezaei, Mahdi Salami Hosseini, Visual Observation of Polystyrene/n-pentane Batch Foaming Process, 11th International Seminar on Polymer Science and Technology, Iran Polymer and Petrochemical Institute, Tehran, Iran, 6-9 October 2014.

7. M. Salehi, M. Salami Hosseini, M. Rezaei, The Effect of Rheological Properties of Polymer Melt on the Bubble Growth Dynamics of Polystyrene/CO2 Foaming System, 11th International Seminar on Polymer Science and Technology, Iran Polymer and Petrochemical Institute, Tehran, Iran, 6-9 October 2014.

8. Reza Izadpanah, Mostafa Rezaei , Azadeh Karimpour, The Effect of Immersion Time and Temperature on the Rate and Degree of Crosslinking of PVC Nanocomposite Foams, 11th International Seminar on Polymer Science and Technology, Iran Polymer and Petrochemical Institute, Tehran, Iran, October 2014.

9. R. Abedi, M. Rezaei and A. Eyvazzadeh, “Synthesis and investigation of the processing condition on physical and mechanical properties of thermoplastic polyurethane nanocomposites - organoclay”, 15th Iranian Chemical Engineering Congress, 2015, Tehran University, Tehran, Iran.


 

10. مصطفی صالحی، مصطفی رضائی، مهدی سلامی حسینی ، بررسی اثر دما بر فرایند فوم شدن سیستم پلی¬استایرن – نرمال پنتان، پانزدهمین کنگره ملی مهندسی شیمی ایران، دانشگاه تهران، 1393.


11. مصطفی صالحی، مهدی سلامی حسینی، مصطفی رضائی، شبیه سازی رشد حباب در سیستم فوم شدن پلی استایرن-دی اکسید کربن و بررسی اثر پارامترهای ترموفیزیکی، پانزدهمین کنگره ملی مهندسی شیمی ایران، دانشگاه تهران، 1393.

12. رضا لطفی مایان سفلی، مصطفي رضائي، علیرضا عیوض¬زاده کلجاهی، "بررسی اثر وزن مولکولی پلی¬کاپرولاکتون بر خواص مکانیکی و حافظه شکلی پلی¬یورتان ترموپلاستیک"، پانزدهمین کنگره ملی مهندسی شیمی ایران ، بهمن

1393 ، دانشگاه تهران، تهران، ایران.


13. M. R. Bahrahimi, M. Rezaei, Z. Mohamadian, Study on the Microstructure and Mechanical Properties of LDPE/UHMWPE Solution Blend Foams, ISPST2012, Amirkabir University of Technology, Tehran, Iran, 2012.

14. H. R. Azimi, M. Rezaei, The visual foaming dynamics of St-MMA copolymers with different compositions, ISPST2012, Amirkabir University of Technology, Tehran, Iran, 2012.

15. R. Hossein Nezhad, M. Rezaei, S. Talebi, The Effect of Temperature on the Sintering of UHMWPE Particles, ISPST2012, Amirkabir University of Technology, Tehran, Iran, 2012.

16. Z. Mohammadian, T. Azdast, Mostafa Rezaei, Optimization of LDPE/UHMWPE Blend Foaming Process by Experimental Design
Overall Evaluation Criteria (OEC) Method, ISPST2012, Amirkabir University of Technology, Tehran, Iran, 2012.

17. V. Pouraman, M. Rezaei, The Effect of Clay Content on Microstructure and Mechanical Properties of Crosslinked PVC Nanocomposite Foams, ISPST2012, Amirkabir University of Technology, Tehran, Iran, 2012.

18. H. R. Azimi, M. Rezaei, Effect of Methymetacrylate units on the non-isothermal degradation kinetics of St-MMA copolymers, ISPST2012, Amirkabir University of Technology, Tehran, Iran, 2012.

19. Zahra Mohammadian, Taher Azdast, Mostafa rezaei, The Effect of Foaming Conditions on the Cell Microstructure and Mechanical Properties of LDPE/UHMWPE Blend Foams, 27th PPS International Conference, Canada, 2012.

20. A. Eyvazzadeh, M. Rezaei, Mechanical properties of anisotropic low density rigid polyurethane/organoclay nanocomposite foam, PPS 2011 Asia/ Australia Regional Meeting, Kish Island, Iran.

21. Z. Mohammadian, T. Azdast, M. Rezaei, M. K. Razavi Aghjeh., The Effect of Processing Parameters on the Thermal Conductivity of LDPE/UHMWPE Blend Foams, PPS 2011 Asia/ Australia Regional Meeting, Kish Island, Iran.

22. Hamid Reza Azimi, Mostafa Rezaei, Farhang Abbasi, The effect of foam processing conditions on the foaming dynamics of MMA-St copolymer, PPS 2011 Asia/ Australia Regional Meeting, Kish Island, Iran.

23. Saman Mahdavi, Mostafa Rezaei, Fracture behavior and morphology of PMMA-organoclay nanocomposite bone cement, PPS 2011 Asia Australia Regional Meeting, Kish Island, Iran.

24. Saied Mardani, Mostafa Rezaei, Saied Talebi, Mehdi Razzaghi, Tribological properties of UHMWPE/HDPE/ MWCNT nanocomposites, ,PPS 2011 Asia/ Australia Regional Meeting, Kish Island, Iran.

25. Farhad Zandi¬¬ , Mostafa Rezaei, Ali Kasiri, Mir Karim Razavi Aghjeh, Naser Harasi, Cell structure, thermal properties and flammability of extruded non-crosslinked LDPE/ Cloisite 20A nanoclay foams, PPS 2011 Asia/ Australia Regional Meeting, Kish Island, Iran.

26. Samaneh Salkhi, Mostafa Rezaei, Mir Karim Razavi Aghjeh, Melt-crystallization behavior and non-isothermal crystallization kinetics of UHMWPE/HDPE/MWCNTs nanocomposite, PPS 2011 Asia/ Australia Regional Meeting, Kish Island, Iran.

27. Ali Aghahosseini, Mostafa Rezaei*, Alireza Eyvazzadeh, Physical-Mechanical Properties of Polyurethane/Polyisocyanurate Organoclay Nanocomposite Foams, PPS 2011 Asia/ Australia Regional Meeting, Kish Island, Iran.

28. Mohammad Valizadeh, Mostafa Rezaei*, Alireza Eyvazzadeh, Thermal conductivity, microstructure and mechanical properties of rigid polyurethane /clay nanocomposite foams, PPS 2011 Asia/ Australia Regional Meeting, Kish Island, Iran.

29. P. Sokhandani, A. A. Babalou, M. Rezaei, Study on the mechanical properties of PVC nanocomposite in the presence of TiO2 nanorods, PPS 2011 Asia/ Australia Regional Meeting, Kish Island, Iran.

30. E. Mehravar, F. Abbasi, K. Jalili, M. Rezaei, S. Heidarpour, Expansion Characteristics of Expandable Styrene/Methyl Methacrylate copolymer beads: The effects of monomer composition and cell structure modifying aid, PPS 2011 Asia/ Australia Regional Meeting, Kish Island, Iran.

31. Ehsan Mehravar, Farhang Abbasi, Kyumars Jalili, Mostafa Rezaei, Expansion Characteristics of Expandable Styrene/Methyl Methacrylate Copolymer Beads: The Effects of Molecular Weight and Particle Size Distribution, PPS 2011 Asia/ Australia Regional Meeting, Kish Island, Iran.

32. Eyvazzadeh A., M. Rezaei , M.Valizadeh, Mechanical Properties and Microstructure of Rigid Polyurethane/Organoclay Nanocomposite Foams, Polymer Processing Society 26th Regional Meeting , PPS-26 IST, 2010 Istanbul (Turkey).

33. Amin Heidari, Mostafa Rezaei, Fracture Toughness of PMMA Bone Cement / Gamma Irradiation MMA-g- UHMWPE Powder Composite, Polymer Processing Society 26th Regional Meeting , PPS-26 IST, 2010 Istanbul (Turkey).

34. Somayeh Ravanbakhsh, Mostafa Rezaei, Nasrin Sheikh, Amin Heidari, Surface Modification of UHMWPE Using Irradiation Grafting of MMA Monomer for Improving Adhesion to Bone Cement, Polymer Processing Society 26th Regional Meeting , PPS-26 IST, 2010 Istanbul (Turkey).

35. Ghaffar Shahamat, Mostafa Rezaei, Study on the Film Formation Behavior of Acrylic and Polyvinyl Acetate Blend Latexes onto Expandable Polystyrene Lost Foam, Polymer Processing Society 26th Regional Meeting , PPS-26 IS, 2010 Istanbul (Turkey).

36. M. Valizadeh, M. Rezaei, Physical-Mechanical Properties and Microstructure of Rigid Polyurethane /Clay Nanocomposite Foams Blown with Iso and Normal Pentane Mixture, International congress on Nanoscience and Nanotechnology 2010 (ICNN 2010), Shiraz, Iran.

37. F. Zandi, M. Rezaei, Effect of Clay Dispersion on the Microstructure of LDPE/Clay Nanocomposite Extruded Foams, International congress on Nanoscience and Nanotechnology 2010 (ICNN 2010), Shiraz, Iran.

38. H. R. Azimi, M. Rezaei, Model-Free Approach to Kinetic Analysis of Non-isothermal Degradation of MMA-St Copolymer and EPS Foams, 9th International Seminar on Polymer Science and Technology (ISPST 2009), Tehran, Iran, 2009.

39. A. Charchi, M. Rezaei, S. Hossainpour, J. Shayeg, S. Falak, CFD Modeling of Transport Phenomena in MMA-St Copolymer Lost Foam Casting Process, 9th International Seminar on Polymer Science and Technology (ISPST 2009), Tehran, Iran, 2009.

40. A. R. Eyvazzadeh Kalejahi, M. Rezaei, Long-term Performance of Rigid Polyurethane Foam Prepared with Different Blowing Agents, 9th International Seminar on Polymer Science and Technology (ISPST 2009), Tehran, Iran, 2009.

41. M. Rakhshani, A.A. Babaluo, M.M.Kamrannejad, M. Rezaei, and M.k. Razavi Aghjeh, Thermal Degradation Behavior of Polyacrylamide Gel, 9th International Seminar on Polymer Science and Technology (ISPST 2009), Tehran, Iran, 2009.

42. H. R. Azimi, M. Rezaei, F. Abasi, Thermal degradation behavior of MMA-St copolymer and EPS foams used in lost foam casting process, PPS-25, 2009, Goa, India.

43. E. Esmaeilnezhad, M. Rezaei, M. K. Razavi, Rigid Polyurethane Foam Blown with Alternative Blowing Agents: Microstructure, Mechanical and Thermal Properties, PPS-25, 2009, Goa, India.

44. A. Charchi, M. Rezaei, S. Hossainpour, M. Abarzani and H. R. Azimi, Modeling of Gap Geometry and Pressure in Expandable Polystyrene Lost Foam Casting Process, PPS-25, 2009, Goa, India.

45. E. Esmaeilnezhad, M. Rezaei, S.Shakoori and M. ¬Khanzadeh, " Relationship between Mechanical properties and Microstructure of Rigid Polyurethane Foams with Alternative Blowing Agents, The 5th International Chemical Engineering Congress (IChEC 2008), Kish Island, Iran, 2008.

46. S. Shakoori, M. Rezaei, F. Abbasi, E. Esmaeilnezhad and Y. Bahloli, " Drying Kinetics and Thermal Properties of Polymer Latex Coating Used in Lost foam Casting, The 5th International Chemical Engineering Congress (IChEC 2008), Kish Island, Iran, 2008.

47. Hamid Reza Azimi, Mostafa Rezaei, Farhang Abbasi, Yahya Bahluli, “ Isokinetic Relationships to Evaluate Thermal Degradation Kinetics Parameters of MMA-St Copolymer and EPS Lost Foams”, 12th Iranian Chemical Engineering Congress, 2008, Sahand University of Technology, Tabriz, Iran.

48. Ebrahim Esmaeilnezhad, Mostafa Rezaei, Mir Karim Razavi aghjeh, Mohsen Khanzadeh,”Investigation of the effect of Microstructure and Density on the thermal properties of ridid Polyurethane Foams with Alternative Blowing Agents”, 12th Iranian Chemical Engineering Congress, 2008, Sahand University of Technology, Tabriz, Iran.

49. H. R. Azimi, M. Rezaei, F. Abbasi, A. Charchi, Y. Bahluli, Kinetics of thermal degradation of MMA-St and EPS lost foams in non-isothermal condition, 42nd world polymer congress (MACRO 2008), 2008, Taipei.

50. S. Shakoori, M. Rezaei, F. Abbasi, E.Esmaeilnezhad, Film Formation and Drying Kinetics of Polymer Latex Coatings Used in Lost foam Casting, 42nd world polymer congress (MACRO 2008), 2008, Taipei.

51. E. Esmaeilnezhad, M. Rezaei, M. K. Razavi Aghjeh, S. Shakoori, M.Khanzadeh, Alternative Ozone Friendly Blowing Agents to CFC's in Rigid Polyurethane Foams: Compressive Strength, Creep and Stress Relaxation Behavior, 42nd world polymer congress (MACRO 2008), 2008, Taipei.

52. S. S. Chavoshi, M. Rezaei, S. Shakori and Y. Bahloli, “ Thermal Properties, Rheology and Morphology of Polymer Latex Coating Used in Lost Foam Casting, 8th International Seminar on Polymer Science and Technology (ISPST 2007), Tehran, Iran, 2007.

53. 40. H. G. Kalteh, M. Rezaei, F. Abbasi and N. Sheikh, “Gamma-Irradiation graft copolymerization of MMA monomer onto UHMWPE”, 8th International Seminar on Polymer Science and Technology (ISPST 2007), Tehran, Iran, 2007.

54. S. S. Chavoshi, M. Rezaei, S. Shakori and Y. Bahloli, "Characterization and study on the latex coating used to improve the surface quality in lost foam castiong", 11th Iranian Chemical Engineering Congress, 2006, Tarbiat Modarres University, Tehran, Iran.

55. H. G. Kalteh, M. Rezaei, K. Jarrahian and N. Sheikh, "Gamma radiation grafting of acrylate groups onto the UHMWPE surface ", 11th Iranian Chemical Engineering Congress, 2006, Tarbiat Modarres University, Tehran, Iran.

56. M. Thamasebpour, A. A. Babalou, M. Rezaei and M. K. Razavi, "Thermal analysis of acrylamide polymeric network used for nanopowders preparation", 11th Iranian Chemical Engineering Congress, 2006, Tarbiat Modarres University, Tehran, Iran.

57. M. Rezaei, N. G. Ebrahimi, M. Kontopoulou, M. H. Navid Famili and S. Namjoo Nik, “Temperature Dependance of melt rheology of UHMWPE/PET composite”, 4th International Seminar on Polymer Science and Technology (ISPST 2005), 2005, Tehran, Iran.

58. M. Rezaei, N. G. Ebrahimi, “ Study on Wear properties of UHMWPE/PET composite as a substitute to UHMWPE in artificial joints”, 12th Iranian Conference on Biomedical Engineering, 2005, Tabriz, Iran.

59. M. Rezaei and N.G. Ebrahimi, “Sintering parameters of UHMWPE composites used in artificial joints”, 7th world Biomaterials Congress, 2004, Sydney, Austarlia.

60. M. Rezaei, N.G. Ebrahimi and M. Kontopoulou, “Crystallization kinetics of UHMWPE/PET composite” , 9th Iranian Chemical Engineering Congress, 2004, Iran University of Science and Technology, Tehran, Iran.

61. M. Rezaei, N. G. Ebrahimi and M. H.Navid Famili, “Study on the effect of processing variables on the impact strength and density of UHMWPE/PET composite using Taguchi experimental design”, 8th International Mechanical Engineering Conference, 2004, Tarbiat Modarres University, Tehran, Iran.

62. M. Rezaei and N.G. Ebrahimi, “The effective variables on particle’s welding in sintering process of UHMWPE composites ” , 8th Iranian Chemical Engineering Congress, 2003, Ferdosi University, Mashad, Iran.

63. M. Rezaei and N.G. Ebrahimi, “Tribomechanical properties of UHMWPE composites ” , 6th Iranian Seminar on Polymer Science and Technology (ISPST 2003), 2003, Iran Polymer and Pterochemical Research Center, Tehran, Iran.

64. Haghtalab and M. Rezaei, “Extension of local composition model to binary polymer melt blends”, 5th Iranian Chemical Engineering Congress, 2001, Shiraz University, Shiraz , Iran.


 
Courses Taught

- Engineering Properties of Polymers (Ph.D.)
- Thermodynamics of Polymer Solutions and Blends (Ph.D.)
- Engineering Properties of Polymers (M.Sc.)
- Physical Chemistry of Polymers (M.Sc.)
- Advanced Thermodynamics (M.Sc.)
- Advanced Mathematics (M.Sc.)
- Plant Design and Economics for Chemical Eng. (B.Sc.)
- Numerical Analysis (B.Sc.)
-Physical Chemistry for Chemical Eng. (B.Sc.)
- Physical and Mechanical Properties of Polymers (B.Sc.)
- Engineering Thermodynamics (B.Sc.)

Degrees

- Ph.D. Polymer Engineering 2005, Tarbiat Modares University, Tehran, Iran.
- M.Sc. Polymer Engineering 2000, Tarbiat Modares University, Tehran, Iran.
- B.Sc. Chemical Engineering 1997, Sahand University of Technology, Tabriz, Iran.